LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Cayman Base, Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> 24 - Fuel System - Electronic Ignition -- 987-BOXSTER-CAYMAN >> WM 247019 Removing And Installing DME Control Unit (CAYMAN, CAYMAN S, CAYMAN Black Edition, CAYMAN S "PORSCHE Design Edition 1", CAYMAN S Sport, CAYMAN S Black Edition, CAYMAN R) >> Installing DME Control Unit

Installing DME Control Unit

  1. Plug in connectors on the DME control unit.
    1. 1.1. Push in connectors on the DME control unit -arrows-  until they engage securely.
    2. 1.2. Plug in connectors on the DME control unit -arrows-  and lock connectors with the locking mechanism.
    Fig 1: Plugging In Connectors On DME Control Unit
    G09586265Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Install DME control unit.
    1. 2.1. Place DME control unit in installation position.
    2. 2.2. Tighten fastening nuts -1-  . → Tightening torque: 10 Nm (7.5 ftlb.) 
      Fig 2: Installing DME Control Unit
      G09586266Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals