| Engine carrier to body |
M10 collar nut |
Tightening torque |
65 Nm (48 ftlb.) |
|
|
| Hydraulic mount to transmission |
Hexagon-head bolts and nuts, M8 |
Tightening torque |
23 Nm (17 ftlb.) |
|
|
| Transmission bracket to transmission |
M10 screw |
Tightening torque |
65 Nm (48 ftlb.) |
|
|
| Ground strap to engine |
External Torx screw, M8 x 20 |
Tightening torque |
23 Nm (17 ftlb.) |
|
|
| Restraining cable to cross member |
Collar nut, M8 |
Tightening torque |
23 Nm (17 ftlb.) |
|
|
| Anti-roll-bar mount |
Hexagon-head bolt, M8 x 40 |
Tightening torque |
23 Nm (17 ftlb.) |
|
|
| Suspension/stabilizer to anti-roll bar |
M10 collar nut |
Tightening torque, Stage 1 |
50 Nm (37 ftlb.) |
|
|
| Suspension/stabilizer to anti-roll bar |
M10 collar nut |
Tightening torque, Stage 2 |
65 Nm (48 ftlb.) |
|
|
| V-strut to body |
M10 screw |
Tightening torque |
65 Nm (48 ftlb.) |
|
|
| Ground strap to body |
Collar nut, M6 |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|
| Junction point for terminal 30 line to holder |
Hexagon nut, M6 |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|