LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Cayman Base, Standard >> Repair and Diagnosis >> Engine Mechanical >> 26 - Exhaust System -- 987-BOXSTER-CAYMAN >> WM 266519 Removing And Installing Secondary Air Pump (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER SPYDER, BOXSTER S Black Edition, CAYMAN R) >> Installing Secondary Air Pump

Installing Secondary Air Pump

  1. Position secondary air pump in installation position.
  2. Push on coolant hose -1-  .
    Fig 1: Identifying Secondary Air Pump Hose
    G09586348Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Connect cable plug and clip it in -1-  .
    Fig 2: Identifying Secondary Air Pump Cable Plug
    G09586349Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Carefully press cable duct down by hand and screw in and tighten the three Torx screws (M6 x 50) -arrows-  . → Tightening torque: 7.5 ftlb.  .
    Fig 3: Locating Secondary Air Pump Screws
    G09586350Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  5. Fasten cable duct by screwing in and tightening the Torx screw (M6 x 16) -arrow-  . → Tightening torque: 7.5 ftlb. 
    Fig 4: Locating Cable Duct Screw
    G09586351Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals