Installing Upper Part Of Heat Shield

Install upper part of heat shield on cylinder bank 1-3. 

1. Guide the heat shield in from the rear and position it.
   Fig 1: Installing Heat Shield

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Fit and tighten screws -2-  .

   → Tightening torque: 13 Nm (9.5 ftlb.) 

   Fig 2: Identifying Cylinder Bank Heat Shield

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Install upper part of heat shield on cylinder bank 4-6. 

3. Install heat shield on cylinder bank 4-6 in the same way as the heat shield for cylinder bank 1-3.