Removing Guide Rail (Passenger Seat With Seat Occupancy Detection)

Fig 1: Identifying Installation Position Of Guide Rail (Folding Sports Bucket Seat)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

→ The threaded connection for the consoles and AWS sensors must not be loosened.

→ The guide rail must always be replaced complete with console and AWS sensors during servicing and reworking.

1. Disengage tension spring -1-  from the outer guide rail -2-  (-arrow-  ).
   Fig 2: Disengaging Tension Spring

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Disengage locking spring -1-  on the fore/aft adjustment lever -2-  (-arrow-  ).
   Fig 3: Disengaging Locking Spring

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Remove fore/aft adjustment lever.
   Fig 4: Removing Fore/Aft Adjustment Lever

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
   1. 3.1. Open locking mechanism -1-  on the seat mounting -2-  (-arrow A-  ).
   2. 3.2. Pull seat mounting -2-  and outer guide rail -3-  out of the fore/aft adjustment lever -4-  (-arrow B-  ).
   3. 3.3. Disengage fore/aft adjustment lever -4-  from the inner guide rail -5-  (-arrow C-  ).
4. Release inner guide rail -1-  from the seat mounting and remove it -arrow A-  .
   Fig 5: Removing Guide Rails

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
5. Release outer guide rail -2-  from the seat mounting and remove it -arrow B-  .