LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Cayman Base, Automatic DCT >> Repair and Diagnosis >> Transmission >> Manual Trans >> 35 - Mechanical Gear-Shift System - Gears & Shafts -- 987-BOXSTER-CAYMAN >> WM 355019 Removing And Installing Sealing Ring For Input Shaft (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER SPYDER, BOXSTER S Black Edition, CAYMAN R) >> Removing Sealing Ring For Input Shaft >> Removing Sealing Ring For Drive Shaft

Removing Sealing Ring For Drive Shaft

  1. Press guide sleeve on sufficiently and drive sealing ring out of the guide sleeve using a punch.
    Fig 1: Removing Sealing Ring Using Tool
    G09586781Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals