Installing Cover For Front Seat

Information 

• Fasten cover to the padding, starting from the inside  .
• Do so in the following sequence: Rear (metal clips), front (plastic clips)  .

1. Engage cushion clips -1-  in the integrated metal strut at the front -2-  of the cover -3-  .
   Fig 1: Fitting Cushion Clips

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Place cover -3-  on the padding -4-  and straighten it -arrows-  .
3. Using the cushion clip pliers Nr.130  and the cushion clips -1-  at the rear, join the integrated metal struts of the padding -5-  to the metal struts for the cover -2-  .
Fig 2: Securing Cover At Back
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Using the cushion clips -2-  at the front, join the integrated metal struts of the padding -4-  to the metal struts of the cover -3-  .
   Fig 3: Securing Cover At Front

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
5. Fold out cover -1-  (-arrows-  ).
6. Check fixing clips -1-  and replace them if necessary.
7. Position cover strips at the left and right -2-  at the cut-outs provided on the padding and clip them into the seat frame -3-  (-arrow-  ).
   Fig 4: Identifying Clipping In Cover Strips

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
8. Fit cover over the padding without creases.
9. Fit cover piping -1-  into the seat frame all the way around using a plastic wedge -arrow-  .
   Fig 5: Fitting Cover Using Tool

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
10. Connect plug connections for heated seats -1-  (-arrows-  ).
    Fig 6: Connecting Plug Connections

    Courtesy of PORSCHE CARS NORTH AMERICA, INC.
11. Fit cover piping at the rear on the seat frame using a plastic wedge -arrows-  .
    Fig 7: Fitting Cover At Rear

    Courtesy of PORSCHE CARS NORTH AMERICA, INC.