Technical Values: Overview

Location	Description	Type	Basic value	Tolerance 1
No. 2: Brake cover plate to front axle	M6 x 12 thread	Tightening torque	8 Nm (6 ftlb.)
No. 4: Cable holder to front-axle wheel carrier	M8 x 14 thread	Tightening torque	20 Nm (15 ftlb.)
No. 5: Brake hose holder to front-axle wheel carrier	M6 x 12 thread	Tightening torque	9 Nm (6.5 ftlb.)
No. 6: Fastening screw securing brake disc to wheel hub	M12 x 1.5 thread (always replace screws and lock nuts after removal)	Tightening torque	15 Nm (11 ftlb.)
Mounting for intermediate piece	M6 x 14 thread	Tightening torque	10 Nm (7.5 ftlb.)
Deflector to body (tunnel)	M8 x 20 thread	Tightening torque	23 Nm (17 ftlb.)
No. 1: Actuator to wheel carrier		Tightening torque	20 Nm (15 ftlb.)	+60° (+44 ftlb.)
No. 2: Screw plug for rear brake disc	M12 x 1.5 thread	Tightening torque	15 Nm (11 ftlb.)
No. 4: Brake line holder to rear-axle brake calliper	M6 x 12 thread	Tightening torque	8 Nm (6 ftlb.)
No. 6: Brake carrier to rear wheel carrier	M6 x 12 thread	Tightening torque	8 Nm (6 ftlb.)
No. 7: Fastening screw securing brake disc to wheel hub	M12 x 1.5 thread (always replace screws and lock nuts after removal)	Tightening torque	15 Nm (11 ftlb.)
No. 8: Cable holder to control arm		Tightening torque	8 Nm (6 ftlb.)
No. 10: ABS cable holder to rear-axle wheel carrier	M6 x 12 thread	Tightening torque	8 Nm (6 ftlb.)
No. 1: Pedals (pedal bearing block) to assembly plate	M8 x 20 thread	Tightening torque	23 Nm (17 ftlb.)	+/-3 Nm (+/- 2 ftlb.)
No. 2: Accelerator pedal to pedal block		Tightening torque	10 Nm (7.5 ftlb.)	+/-1.5 Nm (+/-1.0 ftlb.)
No. 3: Clutch master cylinder to pedal block	Thread	Tightening torque	15 Nm (11 ftlb.)	+/-1 Nm (+/- 0.5 ftlb.)
Cold air bulkhead		Tightening torque	8 Nm (6 ftlb.)	+/-1.5 Nm (+/-1 ftlb.)
No. 1: Clutch slave cylinder to transmission	M8 x 25 thread	Tightening torque	23 Nm (17 ftlb.)	+/-2 Nm (+/- 1.5 ftlb.)
No. 2: Ventilation valve to clutch slave cylinder	Thread	Tightening torque	6 Nm (4.5 ftlb.)	+/-1 Nm (+/- 0.5 ftlb.)