Removing Upper Trailing Arm
WARNING: This page is about a different variant/trim than selected.
Information
In the event of complaints about noises from the upper trailing arm, the trailing arms on both sides of the vehicle must always be checked.
- Unclip ABS wire harness -1-
at the body -A-
.
Mounting point for ABS wire harness to body
- Remove level sensor holder from the upper axle support.
> 431855 Replacing front level sensor - section on "Removing "
- Loosen fastening screws -1-
from the upper axle support -2-
.
Mounting point for upper axle support
- Remove axle support.