Vehicle Height Check (Vehicle Height) - Wheel Alignment
WARNING: This page is about a different variant/trim than selected.
WARNING:
Steering-angle sensor not calibrated or calibrated incorrectly
- Unexpected vehicle handling
- Steering-angle sensor does not function
- Malfunction in steering-angle sensor
- After working on wheel suspension parts, when replacing the steering-angle sensor, and after changing the wheel alignment values, calibrate the steering-angle sensor using the Porsche System Tester.
- Keep the front wheels in straight-ahead position on the measuring platform during calibration.
- Check the actual value of the steering-angle sensor after suspension alignment where no changes were made to the wheel alignment values.
Only check or adjust wheel-alignment values when prescribed preconditions are met.
If the vehicle will be measured at front and rear, check and adjust the rear axle first.
After adjustment, tighten the appropriate screw connections to the specified tightening torque.
The steering-angle sensor must be calibrated if the previous wheel alignment values (on rear and/or front axle) were changed!