Technical Values
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS
| Location | Des... | Type | Basic val... | Toleranc... | Toleranc... |
|---|---|---|---|---|---|
| Threaded connection securing TPM valve to wheel | M5 thread (always use new screws and lock nuts following removal); counter at the valve body, make sure it does not turn! | Tightening torque | 4 (3 ftlb.) Nm | +/- 0.5 (0.3 ftlb.) Nm | |
| Threaded connection securing wheel electronics to TPM valve | (Always use new screws and lock nuts following removal) | Tightening torque | 4 (3 ftlb.) Nm | +/- 0.5 (0.3 ftlb.) Nm |