Wiring Harness For Starter

WARNING: This page is about a different variant/trim than selected.

Fig 1: Starter Wiring Harness Components Location With Torque Specifcation

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Wiring harness for starter

TIGHTENING TORQUE SPECIFICATIONS

1	Nut. M8 > Tightening torque 18 (13 ftlb.) Nm -- dang --
2	Nut. M6 > Tightening torque 6.5 (5 ftlb.) Nm -- dang --
3	Cover; optionally installed ex-works, if cover is not fitted, the battery must be secured with a clamp