Turbocharger Oil Circuit, Cylinders 1 To 4
WARNING: This page is about a different variant/trim than selected.
Oil circuit for turbocharger, cylinders 1 to 4
TIGHTENING TORQUE SPECIFICATIONS
| 1 | Turbocharger vent line for cylinders 1 to 4: vent line to turbocharger oil extraction line > Tightening torque 35 (26 ftlb.) Nm -- dang -- ; holding clamp on vent line to collection pice, M6 screw > Tightening torque 10 (7.5 ftlb.) Nm -- dang -- ; holding clamp on vent line to collection pice. M6 nut > Tightening torque 6.5 (5 ftlb.) Nm -- dang -- |
| 2 | Turbocharger oil feed line for cylinders 1 to 4: turbocharger oil feed line to connection piece > Tightening torque 40 (30 ftlb.) Nm -- dang -- ; turbocharger oil feed line to cylinder head > Tightening torque 35 (26 ftlb.) Nm -- dang -- |
| 3 | Connection piece > Tightening torque 45 (33 ftlb.) Nm -- dang -- |
| 4 | Sealing ring |
| 5 | Oil extraction line |
| 6 | Screw, M6 x 12 > Tightening torque 10 (7.5 ftlb.) Nm -- dang -- |
| 7 | Screw, M6 x 16 > Tightening torque 10 (7.5 ftlb.) Nm -- dang -- |
| 8 | Turbocharger seal, cylinders 1 to 4 |