LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (15 - Engine - Cylinder Head, Valve Drive (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 158219 Removing And Installing Cylinder Head Cover >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Install the relevant cross panel at the left or right.

    > WM 508119 REMOVING AND INSTALLING CROSS PANEL "Installing"

  2. Fit bar ignition modules.

    > 282020 Removing and installing bar ignition modules -  "INSTALLING "

  3. Install oil separator.

    > 105519 Removing and installing oil separator -  "INSTALLING "

  4. Install the engine cover.

    > 108319 Removing and installing engine cover (design cover) -  "INSTALLING "

  5. Connect the battery if necessary.
scientia non olet · About LEMON Manuals