LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Cayenne Turbo >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 32 (15 - Engine - Cylinder Head, Valve Drive (4.8L Non Turbo) -- 92A - Cayenne (92A)) >> WM, 150520 Removing And Installing Camshafts >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.

Complete Steps 1 and 2 together. Set the timing before completing the final tightening of the camshaft controllers and sprockets. 

> WM, 150516 SETTING TIMING 

  1. Install camshaft controllers for timing adjustment.

    > WM, 158419 REMOVING AND INSTALLING CAMSHAFT ADJUSTERS  (camshaft controller)

  2. Install camshaft timing gears for timing adjustment.

    > 150719 REMOVING AND INSTALLING CAMSHAFT TIMING GEAR 

  3. The high-pressure pump must be fitted after installing the intake camshaft for cylinder bank 5 to 8.

    > 246319 REMOVING AND INSTALLING HIGH-PRESSURE PUMP

  4. Install valve cover.

    > 158219 REMOVING AND INSTALLING CYLINDER HEAD COVER 

scientia non olet · About LEMON Manuals