Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| No. 1: Threaded connection securing spring strut to damper housing | M10 thread, observe tightening sequence! First tighten the bolts on the inside of the vehicle | Tightening torque | 50 Nm (37 ftlb.) | +180° | |
| No. 2: Threaded connection securing suspension/stabilizer to wheel carrier/shock absorber strut | M12 x 1.5 x 120 thread (always replace screws and lock nuts after removal) | Tightening torque | 90 Nm (67 ftlb.) | +90 angular degrees |