Removing Rear Panel For Roof Assembly

Pull the seal -3- off the assembly frame until the fastening screws -2- are accessible.
Unscrew fastening screws -2- on the glass panel -1- .

Fig 1: Removing Rear Panel For Roof Assembly
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Raise the front panel -4- .
Slide the rear glass panel -1- slightly under the front glass panel -4- (-A- ).

Fig 2: Removing Rear Panel
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Only lift the rear part of the rear glass panel -1- out of the roof cut-out -B- .
Guide out the rear glass panel -1- by moving it up at an angle -C- over the roof and under the front glass panel -4- .