Technical Values: Differential
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| No. 1: Threaded connection securing differential to chassis subframe | M12 x 1.5 thread (always replace screws and lock nuts after removal) | Tightening torque | 90 Nm (67 ftlb.) | +90 angular degrees | |
| No. 2: Threaded connection securing differential to chassis subframe | M12 x 1.5 thread (always replace screws and lock nuts after removal) | Tightening torque | 90 Nm (67 ftlb.) | +90 angular degrees |