LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Cayenne S >> Repair and Diagnosis >> Suspension >> Front Suspension >> 40 Front Wheel Suspension, Drive Shafts -- 92A Cayenne >> WM 401519 Removing And Installing Upper Trailing Arm (Steel Springs) (Except Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S E-Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Removing Upper Trailing Arm (Steel Springs)

Removing Upper Trailing Arm (Steel Springs)

  1. Unclip ABS wire harness -1-  at the body -A-  .
    Fig 1: Identifying Mounting Point For ABS Wire Harness To Body
    G09935071Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Remove level sensor holder from the upper axle support. → 431855 REPLACING FRONT LEVEL SENSOR
  3. Loosen fastening screws -1-  from the upper axle support -2-  .
    Fig 2: Identifying Mounting Point For Upper Axle Support
    G09935072Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Remove axle support.
scientia non olet · About LEMON Manuals