Installing Front Level Sensor

Information 

• In running gear with level adjustment, a level sensor is installed on each spring strut  .
• The level sensor is screwed to the body and upper control arm  .

1. Position level sensor -1-  and holder -4-  and screw in the fastening screw -3-  . → 4X00IN TIGHTENING TORQUES FOR LEVELLING SYSTEM

   Make sure that the level sensor linkage is facing outwards. → Installing front sensor for levelling system 

2. Plug in electric plug connection -2-  on the level sensor -1-  (-A-  ) and lock it -a-  .
   Fig 1: Installing Front Sensor For Leveling System

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Press linkage holder -1-  into the upper trailing arm -2-  (-A-  ).

   Make sure that the holder -1-  is seated correctly in the upper trailing arm -2-  (-B-  ).

   Fig 2: Installing Holder

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Press locking pin -3-  as far as it will go into the holder -1-  (-C-  ).