Further To 3: Fitting The Wheel On The Vehicle
WARNING: This page is about a different variant/trim than selected.
Fit wheel using a suitable commercially available tool
Information
- Never use an impact bolter.
- Observe the description on wheel removal and installation (fitting wheel on vehicle)
- Fit the wheels with the lowest residual imbalance values on the front axle. Observe the rolling direction of the wheels.
Fit wheel bolts and tighten uniformly. Start at the top when tightening. Always observe the specified tightening torque of 160 Nm (118 ftlb.)
Set required tyre pressure (tyre-pressure plate).