LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 27 (19 - Engine - Cooling (4.8L Turbo) -- 92A - Cayenne (92A)) >> WM, 194019 Removing And Installing Coolant Reservoir >> Preliminary Work >> Installing Coolant Reservoir

Installing Coolant Reservoir

WARNING: This page is about a different variant/trim than selected.
  1. The coolant reservoir is installed in reverse order to removal.
  2. Insert coolant reservoir into the brackets on the floor and tighten screw.

    > Tightening torque 9 (6.5 ftlb.) Nm

  3. Fill in coolant.
scientia non olet · About LEMON Manuals