LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Cayenne S >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 23 (10 - Engine - Crankcase, Suspension (4.8L Turbo) -- 92A - Cayenne (92A)) >> WM, 108019 Removing And Installing Engine Guard >> Removing Engine Guard

Removing Engine Guard

WARNING: This page is about a different variant/trim than selected.
  1. Unscrew side fastening screws -1-  for the front part of the engine guard.
    G16307091Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Loosening fastening screws at the sides

  2. Unscrew rear -2-  and front fastening screws -3-  for the front part of the engine guard.
    G16307092Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Loosening fastening screws at the front

  3. Remove front part of engine guard.
  4. Unscrew rear -5-  and front fastening screws -4-  for the rear part of the engine guard.
    G16307093Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Loosening fastening screws at the rear

  5. Remove rear part of engine guard.
    G16307094Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing rear engine guard