Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| No. 7: Fastening screw securing brake disc to wheel hub | M12 x 1.5 thread (always replace screws and lock nuts after removal) | Tightening Torque | 15 Nm (11 ft. lb.) | ||
| No. 10: ABS cable holder to rear-axle wheel carrier | M6 x 12 thread | Tightening Torque | 8 Nm (6 ft. lb.) | ||
| Threaded connection securing brake calliper to rear-axle wheel carrier | M12 x 1.5 x 115 thread (always replace screws and lock nuts after removal) | Tightening Torque | 85 Nm (63 ft. lb.) |