| No. 4: Cable holder to front-axle wheel carrier |
M8 x 14 thread |
Tightening Torque |
20 Nm (15 ft. lb.) |
|
|
| No. 5: Brake hose holder to front-axle wheel carrier |
M6 x 12 thread |
Tightening Torque |
9 Nm (6.5 ft. lb.) |
|
|
| No. 6: Fastening screw securing brake disc to wheel hub |
M12 x 1.5 thread (always replace screws and lock nuts after removal) |
Tightening Torque |
15 Nm (11 ft. lb.) |
|
|
| Threaded connection securing brake calliper to front-axle 18-inch wheel carrier |
M14 x 1.5 x 115 thread (always replace screws and lock nuts after removal) |
Tightening Torque |
140 Nm (104 ft. lb.) |
|
|
| Threaded connection securing brake calliper to front-axle 19-inch wheel carrier and PCCB |
M14 x 1.5 x 135 thread (always replace screws and lock nuts after removal) |
Tightening Torque |
140 Nm (104 ft. lb.) |
|
|