Preliminary Work

Information 

• Do not open the brake system  .
• Do not loosen the brake hose from the brake calliper when loosening the brake calliper  .
• The core of the warning contact wire must not be left exposed! It does not matter if the insulation is worn  .
• If necessary, remove a little brake fluid from the reservoir by suction in order to prevent an overflow when the disc brake pads are pushed back  .

Lift the vehicle.

→ 4X00IN LIFTING THE VEHICLE .

Remove the wheel. Use assembly aids (Assembly Pins) -1-  .

→ 44051900 REMOVING AND INSTALLING WHEEL .

Fig 1: Identifying Assembly Aids (Assembly Pins)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Information 

• Do not open the brake system  .
• Do not loosen the brake hose from the brake calliper when loosening the brake calliper  .
• The core of the warning contact wire must not be left exposed! It does not matter if the insulation is worn  .
• If necessary, remove a little brake fluid from the reservoir by suction in order to prevent an overflow when the disc brake pads are pushed back  .

Lift the vehicle.

→ 4X00IN LIFTING THE VEHICLE .

Remove the wheel. Use assembly aids (Assembly Pins) -1-  .

→ 44051900 REMOVING AND INSTALLING WHEEL .

Fig 1: Identifying Assembly Aids (Assembly Pins)

Courtesy of PORSCHE CARS NORTH AMERICA, INC.