Removing Front Lid Seal

Information 

• During removal, the seal must not come into contact with hot engine components or adjacent units. This can cause damage to the seal. 

1. Open the lid.
2. Remove front profile seal -1-  .
   Fig 1: Removing Front Profile Seal

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
   1. 2.1. Carefully pull the front profile seal -1-  up off the retaining flange.
3. Pull off rear profile seal -2-  and -3-  .
   1. 3.1. Carefully pull the rear profile seals at the sides -2-  up and forward off the retaining flange.
      Fig 2: Pulling Off Rear Profile Seal At Side

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.
   2. 3.2. Carefully pull the rear profile seal on the inside -3-  forward off the retaining flange.
      Fig 3: Pulling Off Rear Profile Seal On Inside

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.