Installing Actuator For Electric Parking Brake
- Fit actuator for electric parking brake -1-
and tighten two fastening screws -2-
to → Tightening Torque: 2 Nm (1.5 ft. lb.)
.
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
- Carry out a function test.
- The indicator light in the parking brake actuator must be ON when you close it.
- The indicator light in the parking brake actuator must be OFF when you open it.
- Check for locking and release noises from the electric parking brake actuators when you actuate them.