Removing Trailer Hitch Control Unit

Fig 1: Identifying Trailer Hitch Control Unit Position

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

→ Switch off ignition and remove remote control before disconnecting or removing load.

Information 

Always comply with the regulations for handling ESD-sensitive components!

• Assembly work may only be carried out if the mechanic is wearing the working clothes and shoes approved by Porsche.
• The new part must only be removed from the ESD (electrostatic discharge) protective packaging just before installation and at the position at which the part is to be installed. 
• Never touch the electric pins and plug contacts. 

1. Switch off ignition and remove remote control (hand-held transmitter).
2. Unscrew fastening screws -1-  on the bracket -2-  and remove control unit.
   Fig 2: Removing Bracket

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Release electric plug connection for trailer hitch power socket using a screwdriver -2-  (-arrow a-  ) and disconnect it -arrow B-  .
   Fig 3: Releasing Electric Plug Connection For Trailer Hitch Power Socket

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
4. Release electric plug connection using a screwdriver -1-  (-arrow a-  ) and disconnect it -arrow B-  .
   Fig 4: Releasing Electric Plug Connection

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.