Installing Trailer Hitch Control Unit

Information 

Always comply with the regulations for handling ESD-sensitive components!

• Assembly work may only be carried out if the mechanic is wearing the working clothes and shoes approved by Porsche. 
• The new part must only be removed from the ESD (electrostatic discharge) protective packaging just before installation and at the position at which the part is to be installed. 
• Never touch the electric pins and plug contacts. 

1. Plug in electric plug connection -arrow A-  until it engages securely.
   Fig 1: Connecting Plug Connection

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Plug in electric plug connection for trailer hitch power socket -arrow B-  until it engages securely.
3. Position control unit with bracket -2-  and tighten fastening screws -1-  .
   Fig 2: Installing Bracket

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.