LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Cayenne Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 66 - Exterior Equipment -- 92A Cayenne >> WM 664819 Removing And Installing Trim Panel For Rear Lid (Handle Strip) (Except Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Removing Trim Panel For Rear Lid (Handle Strip)

Removing Trim Panel For Rear Lid (Handle Strip)

  1. Loosen fastening nuts for handle strip -1-  .
    Fig 1: Identifying Fastening Nuts For Handle Strip
    G09940245Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Loosen bonding on handle strip by pressing with the socket wrench -arrow  against the fastening nuts.
    Fig 2: Detaching Handle Strip
    G09940246Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Screw off fastening nuts for handle strip.
  4. Carefully remove the handle strip from the rear lid.
scientia non olet · About LEMON Manuals