LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Cayenne Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 66 - Exterior Equipment -- 92A Cayenne >> WM 664819 Removing And Installing Trim Panel For Rear Lid (Handle Strip) (Except Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Installing Trim Panel For Rear Lid (Handle Strip)

Installing Trim Panel For Rear Lid (Handle Strip)

  1. Replace bonding on handle strip if necessary.
  2. The handle strip is installed in reverse order to removal.
  3. Tighten the fastening nuts for the handle strip to → Tightening torque: 6 Nm (4.5 ftlb)  .
scientia non olet · About LEMON Manuals