Installing Rear Wheel Cover

Information 

• The object and room temperature must be at least 18° C for bonding the components. 
• The components must be bonded for at least 24 hours before washing the vehicle. 

1. Fit the wheel cover to the side panel.
   1. 1.1. Position wheel cover -6-  on the side panel -7-  and clip it in.
   Fig 1: Fitting Wheel Cover To Side Panel
   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
   2. 1.2. Pull protective paper -13-  off the adhesive tape.
      Fig 2: Pulling Off Protective Paper

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.
   3. 1.3. Press evenly and firmly on wheel cover in area of adhesive -6-  with the ball of your hand.
2. Fit wheel cover at the door.
   1. 2.1. Pull protective paper -14-  off the adhesive tape.

      Information 

      • Start positioning the wheel cover at the top. 
      • Align the cover flush with the edge of the door. 
      Fig 3: Identifying Protective Paper And Wheel Cover
      Courtesy of PORSCHE CARS NORTH AMERICA, INC.
   2. 2.2. Position wheel cover -8-  at the door -9-  .
   3. 2.3. Press evenly and firmly on wheel cover in area of adhesive -8-  with the ball of your hand.
   Fig 4: Fitting Wheel Cover At Door
   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
3. Fit wheel cover on rear apron.
   1. 3.1. Position wheel cover -10-  on the rear apron -11-  and clip it in.
   Fig 5: Fitting Wheel Cover On Rear Apron
   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
   2. 3.2. Pull protective paper -12-  off the adhesive tape.
      Fig 6: Pulling Off Protective Paper

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.
   3. 3.3. Press evenly and firmly on wheel cover in area of adhesive -10-  with the ball of your hand.
4. Screw in bottom fastening screw -1-  .
   Fig 7: Securing Rear Wheel Cover

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
5. Fit safety clip -5-  .
   Fig 8: Fitting Safety Clip

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
6. Press the wheel housing liner -2-  aside -A-  and screw in the fastening screw -3-  and fastening nut -4-  from the inside.
   Fig 9: Securing Front Wheel Cover

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
7. Screw in fastening screws -1-  for the wheel housing liner -2-  .
   Fig 10: Securing Wheel Housing Liner

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.