LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Cayenne Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 66 - Exterior Equipment -- 92A Cayenne >> WM 661919 Removing And Installing Front Wheel Cover (Cayenne, Cayenne GTS, Cayenne Turbo S, Cayenne S, Cayenne S Hybrid, Cayenne Turbo, Cayenne S Diesel, Cayenne (3.0)) >> Removing Front Wheel Cover

Removing Front Wheel Cover

  1. Detach front wheel housing liner at the wheel arch.
    1. 1.1. Unscrew fastening screws along the wheel arch -1-  .
      Fig 1: Loosening Wheel Housing Liner
      G09940164Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Press wheel housing liner aside.
  3. Unscrew fastening screws -1-  at the front for the front apron.
    Fig 2: Removing Front Wheel Cover
    G09940165Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Unscrew fastening screws -2-  on the wing.
    Fig 3: Removing Rear Wheel Cover
    G09940166Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  5. Pull off retaining clip -3-  .
    Fig 4: Pulling Off Retaining Clip
    G09940167Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  6. Remove wheel cover.
    1. 6.1. Unclip the wheel cover from the body evenly all the way around using an assembly wedge -Arrows A, B and C-  .
    2. 6.2. Pull the wheel cover up and off -arrow D-  .
    Fig 5: Removing Wheel Cover
    G09940168Courtesy of PORSCHE CARS NORTH AMERICA, INC.