Removing Cover For Spray Nozzle

Information 

• Some of the repair illustrations show only one side of the vehicle  .
• Naturally, some steps also have to be performed on the opposite side of the vehicle as well  .
  Fig 1: Identifying Cover For Spray Nozzle Installation Position

  Courtesy of PORSCHE CARS NORTH AMERICA, INC.

1. Disengage cap on nozzle head.
   1. 1.1. Front apron installed: Grasp spray nozzle cover at the sides; the nozzle head -1-  must then be pulled out -A-  and held.
   2. 1.2. Disengage cap -2-  at the latches of the nozzle head -1-  (-B-  ) and remove it.
      Fig 2: Disengaging Cap On Nozzle Head

      Courtesy of PORSCHE CARS NORTH AMERICA, INC.