Gap Dimensions Of Rear Lid
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Spoiler to roof (R1) | Gap dimension | 5.5 mm | +/-1 mm | ||
|
Rear lid to roof |
|||||
| Spoiler to roof (R2) | Gap dimension | 1 mm | +/-1 mm | ||
|
Rear lid to roof |
|||||
| Lid to side panel (R3) | Gap dimension | 4 mm | +/-1 mm | ||
| Rear lid to side panel | |||||
| Lid to rear apron (R4) | Gap dimension | 4 mm | +/-1 mm | ||
|
Rear lid to rear apron |
|||||