Gap Dimensions Of Front Door

→ Gap dimension: 3.7 mm+/-0.5 mm

Fig 1: Identifying Gap Dimension Of Wing To Door

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

→ Gap dimension: 0 mm-1 mm

Fig 2: Identifying Gap Dimension Of Door To Wing

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

→ Gap dimension: 5.9 mm+/-2 mm

Fig 3: Identifying Gap Dimension Of Door Frame To Side Panel

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

→ Gap dimension: 0 mm+2 mm

Fig 4: Identifying Gap Dimension Of Side Panel To Door Frame

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

→ Gap dimension: 4.2 mm+/-1 mm

Fig 5: Identifying Gap Dimension Of B-Pillar Trim On Front To Rear Door

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

→ Gap dimension: 0 mm+0.5 mm-1.5 mm

Fig 6: Identifying Gap Dimension Of B-Pillar Trim On Rear To Front Door

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

→ Gap dimension: 4.2 mm+/-0.8 mm

Fig 7: Identifying Gap Dimension Of Front To Rear Door

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

→ Gap dimension: 0 mm-1 mm

Fig 8: Identifying Gap Dimension Of Rear To Front Door

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

→ Gap dimension: 4.8 mm+/-1.5 mm

Fig 9: Identifying Gap Dimension Of Door Panel To Entry Guard

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

→ Gap dimension: 0.3 mm+0.5 mm-1.5 mm

Fig 10: Identifying Gap Dimension Of Door Entry Guard To Panel

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

→ Gap dimension: 5.7 mm+1.2 mm-1 mm

Fig 11: Identifying Gap Dimension Of Front To Rear Door Panel

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

→ Gap dimension: 0 mm+0.5 mm-1.5 mm

Fig 12: Identifying Gap Dimension Of Rear To Front Door Panel

Courtesy of PORSCHE CARS NORTH AMERICA, INC.