Installing Horn

Information 

Make sure that the plug connections and lines are not touching the horns or the brackets.

1. Position horn -5-  in such a way that the cut-out encloses the raised part -arrow-  of the holder -6-  .
   Fig 1: Positioning Horn

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
2. Tighten fastening screw -4-  .
3. Install holder -6-  with horn -5-  .
4. Tighten fastening screw -3-  . Tightening torque 20 Nm (15 ftlb.) 
5. Connect electric plug connection -2-  until it engages securely -arrow B-  .
6. Clip in electric wire harness at the holder -6-  .
   Fig 2: Installing Horn

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.
7. Install charge air line -1-  on the charge-air cooler and clip it in -arrow-  .
   Fig 3: Installing Charge Air Line

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.