LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Boxster Spyder, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 15 - Engine - Cylinder Head, Valve Control -- 987-BOXSTER-CAYMAN >> WM 157019 Removing And Installing Cylinder Head (All Models) >> Subsequent Work >> Subsequent Work For Cylinder Head 4-6

Subsequent Work For Cylinder Head 4-6

  1. Install camshafts.

    → Installing Camshafts  .

  2. Install cylinder head cover.

    → Installing Cylinder Head Cover  .

  3. Install vacuum pump.

    → Installing Vacuum Pump .

  4. Install positive crankcase ventilation cover on the cylinder head.
    1. Positive crankcase ventilation cover
    2. O-ring, always replace
    3. External Torx screw, M6
      Fig 1: Identifying Positive Crankcase Ventilation Cover (4-6)
      G09585647Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  5. Fit hydraulic return line for power steering on the oil/water heat exchanger and secure it in the holder.
  6. Completely install intake-air distributor.

    → Installing Intake-Air Distributor For Cylinder Bank 1-3 and Installing Intake-Air Distributor For Cylinder Bank 4-6 .

  7. Install the engine.

    → Installing Engine .

scientia non olet · About LEMON Manuals