LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Boxster Spyder, Standard >> Repair and Diagnosis >> Drivelines & Axles >> Wheel Hubs >> 42 - Rear Wheel Suspension, Drive Shafts -- 987-BOXSTER-CAYMAN >> WM 422119 Removing And Installing Drive Shaft (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER S "RS 60 SPYDER", BOXSTER S Black Edition, CAYMAN R) >> Installing Drive Shaft >> Subsequent Work

Subsequent Work

  1. Install support plate -A-  with the diagonal braces -B-  .

    → Installing Support Plate .

    Fig 1: Identifying Support Plates
    G09587568Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Fit rear wheel.

    → INSTALLING WHEEL

  3. Tighten the axle nut.

    → Tightening torque: 460 Nm (340 ftlb.) 

    Tighten axle nut (vehicle on ground) while operating the brake (2 fitters required).

scientia non olet · About LEMON Manuals