LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Boxster Spyder, Automatic DCT >> Repair and Diagnosis >> Suspension >> Front Suspension >> 4X - Chassis - General -- 987-BOXSTER-CAYMAN >> WM 4X00IN Plug-In Couplings For Hydraulic Lines - As Of Model Year 2009 (All Models) >> Information >> Information On Steering And Clutch Lines

Information On Steering And Clutch Lines

The plug-in lines (plug-in couplings) for the steering and clutch hydraulics - arrows- have been changed. Introduction from model year 2009 onwards.  Plug-in couplings -arrows-  are no longer loosened/disconnected by screwing them apart.

The lines are now pulled apart after releasing the plug connection. Use loosening tool 9780  for releasing plug connections.

Do not use any other (commercially available) loosening tools! There is a danger of damaging the plug connection (making it necessary to replace the line). 

Fig 1: Locating Plug-In Coupling (Steering And Clutch Hydraulics)
G09587472Courtesy of PORSCHE CARS NORTH AMERICA, INC.