Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Clutch slave cylinder | Fastening screws between transmission housing and clutch slave cylinder | Tightening torque | 23Nm (17 ftlb.) | ||
| External shift mechanism | Fastening nut between shifting shaft and external shift mechanism | Tightening torque | 23 Nm (17 ftlb.) | ||
| Transmission bracket to Tiptronic transmission, M1 0 x 1.5 | Please note: Do not grease threaded connections in Dacromet finish - aluminum colour. | Tightening torque | 65 Nm (48 ftlb.) | ||
| Transmission bracket to manual transmission, M10 x 1.5 | Please note: Do not grease threaded connections in Dacromet finish - aluminum colour. | Tightening torque | 65 Nm (48 ftlb.) | ||
| Hydraulic mount to rear-axle carrier side section, M8 | Please note: Do not grease threaded connections in Dacromet finish - aluminum colour. | Tightening torque | 33 Nm (24 ftlb.) |