LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Boxster Spyder, Automatic DCT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (34 - Mechanical Gear-Shift System - Actuation, Housing -- 987-BOXSTER-CAYMAN) >> WM 344019 Removing And Installing Transmission Mount (All Models) >> Removing Transmission Mount

Removing Transmission Mount

WARNING: This page is about a different variant/trim than selected.
  1. Unscrew screws -2-  (a/f 16) on the transmission supports -3-  at the left and right.
  2. Unscrew M8 nuts -1-  between the body and hydraulic mounts at the left and right and remove the transmission supports -3-  and hydraulic mounts.
    Fig 1: Identifying Gear Supports With Left And Right Hydraulic Mounts
    G09586710Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals