LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Boxster Spyder, Automatic DCT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (34 - Mechanical Gear-Shift System - Actuation, Housing -- 987-BOXSTER-CAYMAN) >> WM 344019 Removing And Installing Transmission Mount (All Models) >> Installing Transmission Mount

Installing Transmission Mount

WARNING: This page is about a different variant/trim than selected.
  1. Fit gear support -3-  with hydraulic mounts.
  2. Screw on M8 nuts -1-  on hydraulic mounts and secure with M10 screws -2-  (a/f 16) on gear support -2-  .

    → Tightening torque: 65 Nm (48 ftlb.) → Tightening torque: 33 Nm (24 ftlb.) 

    Fig 1: Identifying Gear Supports With Left And Right Hydraulic Mounts
    G09586711Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals