LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Boxster Spyder, Automatic DCT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (34 - Mechanical Gear-Shift System - Actuation, Housing -- 987-BOXSTER-CAYMAN) >> WM 341219 Removing And Installing Shift And Selector Cables (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER SPYDER, BOXSTER S Black Edition, CAYMAN R) >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
WARNING: Vehicle raised incorrectly
  • Danger of fatal injury and material damage should the vehicle fall down

→ Jack the vehicle at the prescribed jacking points.

  1. Jack and raise the vehicle at the prescribed jacking points.

    → WM 4X00IN LIFTING THE VEHICLE (ALL MODELS)

  2. Remove rear wall cover.

    →

  3. Remove engine compartment lid.

    → REMOVING ENGINE COMPARTMENT LID

  4. Remove shift lever knob.

    → Removing Shift Lever Knob 

  5. Remove Centre console.

    → REMOVING CENTRE CONSOLE COVER

  6. Remove handbrake lever.

    → REMOVING PARKING-BRAKE LEVER