LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Boxster Spyder, Automatic DCT >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (34 - Mechanical Gear-Shift System - Actuation, Housing -- 987-BOXSTER-CAYMAN) >> WM 341219 Removing And Installing Shift And Selector Cables (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER SPYDER, BOXSTER S Black Edition, CAYMAN R) >> Installing Shift And Selector Cables >> Securing Shift And Selector Cables At Transmission

Securing Shift And Selector Cables At Transmission

WARNING: This page is about a different variant/trim than selected.
  1. Engage shift -1-  (grey end piece) and selector cable -2-  (blue end piece) into support bracket for transmission and press end pieces onto ball heads.
    Fig 1: Engaging Shift And Selector Cables
    G09586565Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals