Adjusting Shift And Selector Cables

WARNING: This page is about a different variant/trim than selected.

Open bayonet locks at preselector and shift connections.

Fig 1: Opening Bayonet Lock
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Align the shift lever in neutral position using locking bridge P 9619/1 .

Fig 2: Fitting Locking Bridge
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Move external shift mechanism on the transmission into neutral position.
Close bayonet locks on the pre-selector and shift connections.

Fig 3: Closing Bayonet Lock
Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Locking bridge P 9619/1 must be removed.

Fig 4: Removing Locking Bridge
Courtesy of PORSCHE CARS NORTH AMERICA, INC.