Checking And Topping Up Transmission Oil - 6-Speed
WARNING: This page is about a different variant/trim than selected.
Checking and topping up transmission oil
WARNING:
Hot fluid
- Danger of scalding
→ Let the fluid cool down.
→ Wear personal protective gear.
- Unscrew oil filler plug.
- Angled wire hook (shop made) 00000 must be inserted through the filler opening. Then check the oil level. The oil level must be 2 to 3 mm below the filler opening, otherwise oil must be added.
- Clean oil filler plug and screw in with a new sealing ring.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Oil filler plug on manual transmission | Tightening torque | 40 Nm (30 ft lb.) |