LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Boxster Spyder, Automatic DCT >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 13 - Engine - CRANKGEAR, Pistons -- 987-BOXSTER-CAYMAN >> WM 136319 Removing And Installing Drive Plate For Converter (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER S "PORSCHE Design Edition 2", BOXSTER S Black Edition, CAYMAN R) >> Installing Drive Plate For Converter

Installing Drive Plate For Converter

  1. Position drive plate on the crankshaft's dowel pin and press on to the crankshaft flange. Insert all M10 x 25 fastening screws (8).
  2. Align toothed segment 9538/1  and tighten fastening screw again.
  3. Screw in and tighten fastening screws in diagonally opposite sequence. → Initial tightening: 25 Nm (ftlb.) (19)  ; → Final tightening - torque angle: 120° 
  4. Remove toothed segment.
scientia non olet · About LEMON Manuals