LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2011 >> Boxster Spyder, Automatic DCT >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 13 - Engine - CRANKGEAR, Pistons -- 987-BOXSTER-CAYMAN >> WM 136019 Removing And Installing Dual-Mass Flywheel (Except CAYMAN Black Edition, CAYMAN S Black Edition, BOXSTER Black Edition, BOXSTER SPYDER, BOXSTER S "PORSCHE Design Edition 2", BOXSTER S Black Edition, CAYMAN R) >> Subsequent Work

Subsequent Work

Information 

Loosen and tighten screws on the component according to specifications.

  1. Install the clutch.

    → Installing clutch .

    → Initial tightening: 15 Nm (11 ftlb.) 

    → Final tightening - torque angle: 45° 

  2. Install manual transmission.

    → Mounting transmission .

scientia non olet · About LEMON Manuals